Free Apron Pattern

Easy and quick to make apron

A good way to use novelty kitchen prints.

Requirements

60cm of fabric for the apron (or 90cm is enough for 2 aprons).
4.2 m of bias tape - 1" remade bias or make your own.

Instructions

Print out the pattern pieces - make sure the printer is set to 100%. Join the two pieces together.

Pattern Piece A - top of the apron

Pattern Piece B - bottom of the apron

Fold the fabric and cut out the apron piece. Sew bias strip to the sides and bottom of the apron- need about 65" (165cm) Sew bias strip to the top of the bib section of the apron - need about 10" (26cm)

Sew bias strip to the arms hole section of the apron  - need 2 strips about 70" (180cm). Neaten off the ends by turning the raw edges inside and top stitching

.

Add a pocket - finished size 12" x 5 1/2". I cut a piece 13" x 13" - fold in half right sides together, sew a seam down both sides. Turn through. Trim the folded side with bias for a nice look. The raw edge will be the bottom of the pocket. Turn this edge under and topstitch onto the apron.   Happy cooking!!